If you do not want to spoil your exciting road trip, you should know How to use an air compressor to inflate tires. Suppose you are fond of road trips or the nature of your job is such that you have to travel a lot on any vehicle then you must be well aware of the common problems like shaking handles and steering wheels, more fuel consumption by the cars, battery troubles.
Flattening of car tires, annoying noises, and sputtering of the engine, the engine gets lockdown, or you may run out of fuel, etc. The most common problem is the flattening of the tire.
These common problems can be avoided by taking precautionary measures like checking the fuel before going out, checking the car battery and oil and water, alignment of tires, and checking out the PSI of your car tires to avoid any unwanted accidents on the road. As an honor, you must know the recommended tire pressure. Before setting off for the journey, you have a plan to buy the best air compressor to maintain your vehicle tire PSI.
Table of Contents
What causes a flat tire?
Before learning How to use an air compressor to inflate tires, you must be familiar with the common causes of the tires’ flattening. You may get a flat tire if your tire gets punctured by any sharp object like nail or glass, damaged valve stem, leakage, clashing of the tire with any other object, and overly inflated tires can also be a reason. Knowing the cause is very important because if the car is punctured, inflating it won’t help.
Weather also affects the flattening of a car as on a cold day, the air pressure in the tires can fall, or on a hot summer day, it can rise drastically, resulting in the tire’s exploding. The pressure in the tire drops considerably with every 10-degree fall in temperature.
How to use the air compressor to inflate car tires:
Before inflating the tire, you need to check carefully which size and type of air compressor you will need to inflate your flattened tire. The knowledge about PSI’s proper value is essential because properly and adequately filled tires will let your vehicle tires roll seamlessly on the road. The PSI value also differs among the tires which roll on roads, mountains, or deserts, so as an expert driver, you must know how much pressure your tire needs.
It is typically written on the side of the car door or the side of the tire. The information written on the tire sides is actually about the minimum PSI necessary for the vehicle’s properly coordinated functioning:
- Now let’s start with how to use the compressor to inflate tires. For this, you need to drag the air compressor near to your flattened vehicle so you can easily inflate the tire without any hindrance. Hdx air compressor units are portable with tires, which makes it easy to drag them anywhere. Take off the valve’s cap (make sure you don’t misplace this tiny little thing).
- Put the air compressor tire inflator nozzle on the valve and lock it in place. Start the unit and monitor the pressure on the air compressor gauge. Depending upon how much the tire is flattened, the tire may take some time to gain the proper PSI. Some air compressor units turn off automatically when the desired PSI is achieved, while others may need you to turn them off. Measure the PSI at the end to see whether you have adequately filled the air.
- Remove the air compressor’s nozzle from the valve and then put the cap of the valve on quickly. The tire may lose some air if you take the time to put the cap on. If you have accidentally overinflated the tire, you must know how to let the air out of the tires. Just open the cap of the valve until you hear the air hissing out of the tire.
How to check the pressure of the air in the tire:
It is a good thing to have a handy air gauge in your car so you can measure the PSI of the tires at any time. Measuring the pressure of the tire with an air gauge is actually quite simple. You need to remove the steam valve cap and push the air compressor’s hose on the valve stem until you hear some air hissing out of the tire. Measure the pressure, remove the air compressor gauge, and put the cap back on.
The steps of using an air compressor to inflate the tires may seem simple, but actually, there are many minor details that you need to consider. These details can help you to inflate the tires like a pro and avoid accidents.
Consequences of over and under-inflation of tire:
You must not inflate the tire below the recommended value or put too much air to overinflate it because it can also result in accidents. The overly inflated tire becomes bouncy and can give you a bumpy ride in Go-kart. Under inflating your tire can also have some consequences as it can lower the mileage of your vehicle.
Under inflating, tires can also result in wear and tear of the tires which can, in turn, cause the tire to blow out. Sudden bursting of tires can result in serious accidents. Underinflation can also affect the traction of your car.
How to use an air compressor to inflate tires
If you are wondering how to use an air compressor to inflate bike tires then you can follow the above-mentioned procedure. One exception is that you need to fill the tire according to the recommended value of your bike tire.
Leave a Reply